Other supplies

!

D1 Pump Hanger

D1 Pump Hanger

Hanger for the Vortex D-1 diatom filter, for hanging the Vortex on aquarium.
Convert your d1 into a hanging type filter like the dff.  Makes it easy to transfer your diatom filter from one tank to the next.

Diatom Motor d-1

Replacement motor

Hose Clamps 4pk

Hose Clamps 4pk

A four pack of Diatom filter hose clamps which are used to effectively keep your hoses from leaking. They will provide enough pressure on your hoses to keep water from dripping down onto the floor.

Instructions:
Place the hose clamps on the hoses first and then slide the hose onto the knob on the Vortex filter. Once the hose is placed onto the knob correctly, slide the hose clamps down onto the knob so that they can ceal the hose.

Intake and exhaust tube

Intake and exhaust tube for Vortex diatom filters

Kitchen Sink Faucet Adaptor

Kitchen Sink Faucet Adaptor

The faucet adapter fits kitchen and laboratory faucets to backwash the Vortex to remove dirty diatom powder. Includes dual thread snap adapter, two washers and easy to follow instructions.

Laundry Sink Faucet Adaptor

Laundry Sink Faucet Adaptor The faucet adapter fits laundry and outdoor faucets to backwash the Vortex to remove dirty diatom powder. Includes snap adapter, one washer and easy to follow instructions

O-ring Xl-9 (Vortex)

This is the replacement O-ring for the XL Vortex Diatom Filter.

Recharge Bottle

The recharge bottle allows fresh diatom powder to be added to the filter without disconnecting the tubing.

Recharge Valve

An "H" valve designed to allow the Diatom filter and other series of canister filters to be moved from one aquarium to another without breaking the intake siphon or disturbing the "diatom coat".

Recharge Valve


An "H" valve designed to allow the Diatom filter and other series of canister filters to be moved from one aquarium to another without breaking the intake siphon or disturbing the "diatom coat". Filter restarts are accomplished with no chance of diatom powder entering the aquarium. Includes valve and 4 washers.

Replacement Impeller d1-xl

Replacement impeller for the D1/XL Vortex Diatom Filter

Replacement Jar For Diatom Filters XL

Fits the XL diatom filter ONLY Glass

Replacement jar gasket for Vortex filters.

Replacement jar gasket for Vortex filters.

Replacement Jar Ring

Replacement jar ring for Vortex filters.

Replacement motor XL

This is the replacement motor for the XL Vortex Diatom Filter.

Specifications:
Includes the XL Vortex replacement motor, O-ring, Retainer Ring, and 6 Thumb Screws.

Size:
8.5” high x 5” diameter
Cord: 6' long

Spare shaft seal for the D1 filter or XL

This is a replacement shaft seal for the vortex diatom filter d-1 or xl part # p-16

Squeeze Bottle Siphon Starter

Squeeze Bottle Siphon Starter The squeeze bottle siphon starter works on any Diatom filter. Starts Vortex filters quickly and easily.

Strainer

Strainer piece for Vortex diatom filter systems

Tube plugs

Cap o/ Tube Plugs are replacement part P-25 for the Vortex Diatom Filter

Vortex gravel washer

The Vortex gravel washer
The Vortex gravel washer can be used on any Vortex or any other canister filter using 5/8" tubing and a flow rate of 100 gph or more. It connects to the filter to clean the gravel quickly and easily without removing water from the tank. For use with standard size gravel. Includes the spinning chamber (4"W x 7 1/2"h), gravel tube (8 1/2"h), mounting bar (4"), adapter and 2 washers.

xl main casting Replacement

Replacement Main Casting for the XL Vortex filtration units.

XL Retainer Ring (Vortex)

This is the replacement Retainer Ring for the XL Diatom Filter.

U Tube Set for Vortex Diatom Filter

U Tube Set for Vortex Diatom Filter

The u-tube set is for xl units and d-1 diatom filters